Re: T/G Floor panels

message from Toby on 12 May 2004
You can but use the 22mm stuff rather than 18mm. Add noggins between the
joists at suitable intervals to support the join, especially a four panel
join. Put glue in the groove as well or you will forever have squeaky
floors, for the same reason leave a 5 > 10mm gap at the wall (which will be
covered by the skirting anyway).
 

Archived message: Re: T/G Floor panels (UK DIY House Improvement)
 
Note: To make this discussion more readable on the page the original messages have been edited to remove most of the references and quoting.