| | |
|
|
|
Re: Cutting across floorboards |
|---|
| message from Jerry Built on 17 May 2004 |
I start with a normal blade and the jigsaw on it's nose. Start
the cut, and plunge the tip of the blade in. When the required
depth is reached, keep the machine at the same angle, and drag
it across the board. Reverse position at other side to cut the
last bit. Take care, go slowly, it may help you to experiment
first with different "pendulum" settings.
|
|
Archived message: Re: Cutting across floorboards (UK D-I-Y Home Renovation)
