| | |
|
|
|
Re: Upload a site |
|---|
| message from Murray *TMM* on 16 Jul 2004 |
If you are using a router, you don't really need a firewall, unless you want
to take the 'belt and bracers approach'.
|
| Jonathan Stowe replied to Murray *TMM* on 16 Jul 2004 |
No, it is entirely a matter of the configuration and the application.
Traffic from my laptop here has to traverse at least 22 routers to get
to forums.macromedia.com - none of which appear to do any network
address translation whatsoever.
I'm sure you can find the websites of Cisco or Extreme or Jupiter or
Foundry or whatever yourself.
/J\
|
| Murray *TMM* replied to Jonathan Stowe on 16 Jul 2004 |
Soitenly. I use a Linksys (Cisco), and it always tests in full stealth at
grc. My experience with routers is limited, but my assumption was that all
of them did NAT translation as default (I'm talking about consumer routers,
not industrial ones).
|
|
Archived message: Re: Upload a site (Macromedia Dreamweaver Web Design)
